DasMikro Programmable Sound Unit for Orlandoo F150 OH35P01 KIT Micro RC Crawlers

Programmable Sound Unit for Orlandoo F150 OH35P01 KIT Micro RC Crawlers Description This soundunit is developed specially for electric powered RC It could be used to 1 35 1 24 and 1 18 RC crawlers Especially suitable for Orlandoo F150 OH35P01 KIT Assemble Climbing RC Car Parts VersionFeatures Plug and Play Soundquality 22KHzInternal 1W amplifier at 8 Ohm speakersAll connections done by plugs no solderwork necessaryReceiver signals are used for speed information this allows brushless or DC Motor usageFully assembeled in SMD technology no heavy vibration sensitive components All wires includedVery little dimensions and weightTechnical Datas Dimensions 11 x 23 5 x 3 2mm min 11x16x3 2mm Voltage 3V to 5V supplied by the receiver Note the maximum supply voltage of 5V Current app 10mA without sound app 250mA at max volumeSpeaker 8 32 OhmOutput power 1W at 8 Ohm at 5V 0 6W at 8 Ohm at 3VProportional inputs Positive Impuls 0 8ms bis 2 0msSoundquality up to 22 05 kHz Teaching the sound unit for throttle idle accelerate point 1 Power on transmitter and receiver LED blinks fast normal mode Bring throttle stick to idle Motor must not move 2 Bridge study switch for about 0 5 seconds until beep LED cont on At this moment the idle position of the throttle stick is stored 3 Move throttle stick to your desired acceleration point throttle stick position where idle dead band stops and engine running sound starts and wait for a beep Now the dead neutral band