CNC Step Down Power Supply Module With Digital Display Constant Voltage Output Adjustable

Features: 1. Integrate analog adjustment and digital control. 2, the output voltage is adjustable from 0-35 volts (constant voltage output mode) stepping 0.01 volts. 3, the output current is adjustable (constant current output mode) stepping 0.01 amps. 4. The product has a power-down preset value storage function, which can store 5 groups of preset values. 5, with its own liquid crystal display, with voltage and current meter function, through the liquid crystal can easily view the preset voltage, preset current, output voltage, output current, output power and so on. 6. The output status display area can conveniently see whether the output is currently turned on/off, the constant voltage/constant current output status, whether the output is normal, and the data group currently being called. 7. The overvoltage value, overcurrent value, overvoltage power, data set, liquid crystal brightness, etc. can be adjusted in the data setting interface. Specifications: Input voltage range: 5V~40V Output voltage range: 0-35V adjustable Output current range: 0-10A adjustable Maximum power: 150W Constant voltage mode maximum voltage: 35V Constant current mode maximum current: 5A Output voltage setting and reading resolution: 0.01V Output current and read resolution: 0.001A Output current setting and reading accuracy: (0.5% +1 words) Output current setting and reading accuracy: (0.5% + 3 words) Dimensions: 95mm*50mm*54mm Installation size: 90mm*47.5mm Product weight: about 130 grams Instructions: 1.Work interface - Setting status display: Cannot set parameters when ROCK/locking OPEN/Setting parameters can be set - Work status display: WORK/output indicates that output is being output STOP/stop means no output - Operating mode display: CV / constant voltage means constant voltage output mode CC / constant current means constant current output mode - Adjustment knob: Left/right rotation adjustment parameter size Press to change step 0.01/0.1/1/10 - Set button: long press to enter setting mode Short press to change setting status - Select button: press to select the setting type Set the output voltage / set the output current - Work button: Press to change the working state Output voltage / stop output voltage 2. Settings interface - Set the brightness: set the screen brightness value the bigger the brighter the maximum is 8 minimum is 1 - Cursor: where the cursor is where the parameters are adjusted Press the up and down keys to move the cursor - Maximum voltage: set the maximum voltage. When this value is exceeded, the output will stop. - Maximum current: setting the maximum current to exceed this value will stop output - Maximum power: set the maximum power beyond this value will stop output - Set the operating mode: constant current / CV constant voltage output Constant current / constant current output - Set parameter group: Up to 5 sets of setting parameters can be stored - Set display language: support Chinese and English switching - Adjustment knob: Left/right rotation adjustment parameter size Press to change step 0.01/0.1/1/10 Precautions for Use: 1 Input voltage should be less than 40 volts. 2 Note that the output section cannot be shorted. 3 Pay attention to the heat dissipation environment when outputting at full load. 4 The input power is greater than the output power. 5 Wiring should be strong to prevent sparks. 6 input voltage should be greater than 5 volts 7 input voltage should be greater than the output voltage of 1v or more Causes and Exclusions: 1. If you start working with a black screen after connecting the output, you need to change the power supply with a larger power. 2. If it is found that the output cannot be pressed, check if the load is shorted. Package Included: 1 x CNC Step Down Power Supply With Digital Display 1 x Manual