Ardupilot PixConcise Compatible Pixhawk Flight Controller w/ CNC Case for RC MultiRotor Airplane

Ardupilot PixConcise Compatible Pixhawk Flight Controller w/ CNC Case for RC MultiRotor Airplane Introduction: Pixconcise optimization of F4BY, Replace IMU & Compasser to InvenSense ICM20689 IMU, Ist8310 compass as Pixhawk4 Sensors. Support for this board is available with Ardupilot Chibios Boards. Specification: Item Name: Autopilot PixConcise Flight Controller Version: Bend Pins / Straight Pins ( Optional) Bend Pins: Points at all pins are bend pins Straight Pins: Points at 1 Straight Pin and 2 Bend Pin Dimension: 53x53x16mm Weight: 9.6g ( Only Flight Controller) 40.5g ( With CNC Case) Features: - Arduploit firmware, Missionplanner Ground Station - Compatible Arduploit kinds of hardware ( RTK GPS, CAN etc.) - Have innter extand IMU Port and support Second IMU Module Extend - Support Max. 12 PWM Signal Output and full I/O port - Support Dual GPS Module, - using Dual External Compass Function, With CNC Case - Application for RC Multi-Rotor, Airplane, Cars and Robot Package Included: 1x Flight Controller 1x SH1.0 8p to SH1.25 8p power Module wire 1x SH1.0 4p to Dupon 2.54 4p OSD wire 1x SH1.0 4p to SH1.25 4p IIC wire 2x SH1.0 4p single plug GPS or Telemetry Module wires 1x 3pin Dupon 2.54 to Dupon receiver wire 1x IIC Splitter 1x Buzzer & 2pin Dupon 2.54 wire 1x 3M Double sided tape 1x 3D printing vibration dampening mount