GEPRC GEP-VTX58200-M 5.8G 48CH 0/25/100/200mW FPV Transmitter 20x20mm Hole for RC Drone FPV Racing

GEPRC GEP-VTX58200-M 5.8G 48CH 0/25/100/200mW FPV Transmitter 20x20mm Hole for RC Drone FPV RacingNote: Please install antenna (must be done) before debugging or testing VTX(and OSD), or lead to VTX not working properly.Specification:Brand name: GEPRCItem name: GEP-VTX58200-M FPV TransmitterChannel output : 48Ch(A,B,E,F,H,R)Input voltage : 7-24V DC (2-6S)Vtx output the camera voltage: 5vPower transmission: 0mW / 25mW / 100mW / 200mWSize (mm): 25 * 25 * 4.5Mounting Holes Dimension:20*20mmConnector type: IPEX ConnectorWeight: 3.5g(including antenna)Feature:Support Power tuning;Transmit power 4 gear switch: 0mw/25mW/100mW/200mW;The output power is stable ,the far transmission distance: 0.6km@25mW, 1km@100mW, 1.5km@200mWOutput 48 frequency points, and has R group 8 race frequency at the same time using each other without interference;Frequency lock fast, boot does not interfere with companions;Full format video format: NTSC /PAL;Wide input voltage range. low power consumption; 7V~24V, +12V/170mA@200mW;Small volume: 25mm25mm4.5mm;mounting holes 20mm20mm(4 * M2) correspond exactly mini CC3D NAZE32 F3 F4 Flying controlLight weight: 3.5g(including antenna)How to use:1. Set the ChannelIn standby mode, press and hold the key for 3 seconds, the blue LED flashes, short press, change the channel value.Every time 1 press will change the CH, followed by 1CH to 8CH cycles.2. Set the BandIn the channel setting mode, press and hold the key for 3 seconds, the green LED flashes, briefly presses,