570W 8 Core Semiconductor Cooler Refrigeration Small Air Conditioner Pet Cooler DIY

Description Used for plate cooling pet bed cooling test bench small space cooling Stable work low noise no need for refrigerant Suitable for small space refrigeration semiconductor refrigeration learning theory refrigeration equipment planning formulated by research solution The air cooling device is not used for cooling water but water is used to dissipate heat Finally the water is hot not cold The supporting space is 1 2 cubes and the temperature difference is between 8 13 degrees Specification Voltage DC12 V Power Maximum power 576W 8 chips 15 4 V Maximum current 48A Stable current 34ASteps 1 connect power supply note 2 Check if the fan rotates normally 3 Put in a suitable spaceNote Frosting requires a low ambient temperature Generally water is used to dissipate heat The frosting ambient temperature is below 35°C If the cold end fan is not turned on run for 10 20 minutes The hot end of the refrigeration fin must be properly dissipated If the heat dissipation is not good not only the temperature will not be too low but also the refrigeration fin will be easily burnt The water circulation must be done well do not plug in the electricity without circulating water for heat dissipation Frosting requires a low ambient temperature Generally water is used to dissipate heat The frosting ambient temperature is below 35°C If the cold end fan is not turned on run for 10 20 minutes The hot end of the refrigeration fin must be properly