1PC 433Mhz DC12V 1CH RF Transmitter For Wireless Remote Control Switch Relay Receiver Module

It can used with Product ID 1326823Feature Wiring type Fixed terminalStandby current 5MAInput power DC10V 14VRF frequency 433MhzReceive sensitivity 97dbmOutput terminal NO NC COMRF working mode SuperheterodyneDecoding mode MCU software decodingTransmitting distance 100m open space Support remote type Learning code Fixed code Rolling code can be design Working mode Momentary Toggle Latching Time delay 5s 10s 15s About Working mode Momentary Push the remote button the relay connects release the remote button the relay disconnects Toggle Push once the remote button the relay connects push twice the remote button the relay disconnects Latching Push the remote button A the relay connects push the remote button B the relay dis connect Time delay mode Push the remote control button the relay connects from when releasing the remote button after 5s or 10s or 15s the relay disconnect automatically Clearing the code Push the learning button on the receivers for 8 times the codes will be cleaned After clearing the code all the remote control cannot work anymore 1 Learning the code Momentary Push the learning key on the receiver once time it comes into the momentary setting mode Wait for a moment the LED will be off it comes into learning state Push the remote button LED indicator on the receiver board will flash then come off After 3 seconds the LED indicator will be on again learning successfully 2 Learning the code