1111Fourone Remote Control Solar Indoor Pendant Lamp Three Level Brightness Adjustable Hallway Lights Waterproof Solar Chandelier

Bullet points: 1. Three induction methods: manual switch remote control switch solar sensor switch you can choose according to your needs. 2. Automatically adjust the brightness: when the battery is low in rainy days the brightness will be automatically adjusted to extend the use time. 3. Highlight without glare: In the maximum brightness mode you can read and write beyond 5M. 4. Three levels of brightness adjustment: 100%; 50%; 25% three kinds of brightness you can choose according to your needs. 5. Remote control design: remotely switch lights or time lights which is convenient and quick. How to use: Step 1: Turn on the white button behind the solar panel and then cover the solar panel. (Make sure the solar panel is in the dark) Step 2: Turn on the remote control and check whether the solar light can be used normally. Possible reasons for not being able to use: 1. When the solar energy is used up it needs to be charged outdoors; 2. Did not press the switch behind the solar panel; 3. The solar panel is not covered and the solar panel is exposed to light; 4.The remote control does not remove the insulating plastic sheet. Descriptions: Material: PC ABS polysilicon Solar panel specifications: 1.6W 5.5V polysilicon Battery specification: 3.7V 2200/4800mA (optional) Size: solar panel (10.5*17cm) lamp (7*18cm) LED chip: highlight 5050 Charging time: the fastest 4H (affected by light intensity) Line length: 3 Meters Rated power: 1.5W Waterproof rating: IP65 Discharge duration: 18H continuous discharge at full power Package included: 1 Set*Solar Chandelier Note: It is normal for the lights to flicker. This is to test whether the light can work normally and it needs to be used with the remote control. If the solar panel is in a semi-bright and semi-dark environment it will flicker crazily and you need to transfer it to a completely dark environment to start working normally.